APPLICATION
Stir thoroughly with a flat paddle
Ready for use
Apply a minimum of 2 coats
Allow 16 hours @ 25ºC drying in between coats
Apply by brush, roller or airless spray
Thin with mineral turps if required

NEW MASONRY SURFACES
Ensure surfaces are clean, dry and contaminant free
Cracks should be raked out and primed with ChemSpec PROFESSIONAL Plaster Primer prior to filling
Prime the entire surface with ChemSpec PROFESSIONAL Plaster Primer

PREVIOUSLY PAINTED MASONRY SURFACES
Ensure surfaces are clean, dry and contaminant free
Remove all loose and flaking paint
Remove perished plaster and make good, prime with ChemSpec PROFESSIONAL Plaster Primer
Prime all chalky substrates with ChemSpec PROFESSIONAL Plaster Primer
Lightly sand well adhering coatings

OTHER SURFACES
Metal: Prime with ChemSpec INDUSTRIAL Galvanised Iron Primer or RP4
Wood: Prime with ChemSpec INDUSTRIAL Wood Primer followed by ChemSpec PROFESSIONAL Universal Undercoat
Gloss Enamels: Prime with ChemSpec PROFESSIONAL Universal Undercoat
Aluminium: Prime with ChemSpec INDUSTRIAL Vinyl Wash Primer

SPREAD RATE
8-10m2/lt depending on surface porosity

CAUTIONS
Do not apply in cold, wet weather
Drying times may vary with temperature
Certain bright colours may require several coats to obliterate the substrate

SAFETY
Keep out of reach of children
Contains: WHITE SPIRITÊÊÊ
Flammable. Vapours may cause drowsiness and dizziness
In case of fire, use water fog, foam or powder - Do not use water jets!