APPLICATION
Stir thoroughly with a flat paddle
Ready for use
Apply 1-2 coats
Allow 4-6 hours @ 25ºC drying in between coats
Apply by brush, roller or airless spray
Thin with mineral turps if required

NEW MASONRY SURFACES
Ensure surfaces are clean, dry and contaminant free
Cracks should be raked out and primed with ChemSpec PROFESSIONAL Masonry Primer prior to filling
Prime the entire surface with ChemSpec PROFESSIONAL Masonry Primer

PREVIOUSLY PAINTED MASONRY SURFACES
Ensure surfaces are clean, dry and contaminant free
Remove all loose and flaking paint
Remove perished plaster and make good, prime with ChemSpec PROFESSIONAL Masonry Primer
Prime all chalky substrates with ChemSpec PROFESSIONAL Masonry Primer
Lightly sand well adhering coatings

SPREAD RATE
7-8m2/lt depending on surface porosity

CAUTIONS
Do not apply in cold, wet weather
Drying times may vary with temperature

SAFETY
Keep out of reach of children
Contains: WHITE SPIRIT, SOLVENT NAPHTHA LIGHT AROMÊ
Highly Flammable. Repeated exposure may cause skin drying or cracking
Keep away from sources of ignition - No smoking
In case of fire, use water fog, foam or powder - Do not use water jets!
Use only in well ventilated areas