APPLICATION
Stir thoroughly with a flat paddle
Ready for use
Apply a minimum of 2 coats
Allow 2 hours @ 25ºC drying in between coats
Apply by brush, roller or airless spray
Thin with water if required

SURFACE PREPARATION
Ensure surfaces are clean, dry and contaminant free
Metal: Prime with ChemSpec INDUSTRIAL Galvanised Iron Primer or RP4
Fibre Cement: Prime with 1 coat of Roof Paint diluted 20% with water
Enamel: Prime with ChemSpec PROFESSIONAL Universal Undercoat
Wood: Prime with ChemSpec INDUSTRIAL Wood Primer, followed by ChemSpec PROFESSIONAL Universal Undercoat
Aluminium: Prime with ChemSpec INDUSTRIAL Vinyl Wash Primer
New / previously painted masonry surfaces: Prime with ChemSpec PROFESSIONAL Masonry Primer

SPREAD RATE
2-5m2/lt as a waterproofing compound (with membrane)
6-8m2/lt as a standard roof coating

CAUTIONS
Do not apply in cold, wet weather
Drying times may vary with temperature

SAFETY
Keep out of reach of children