APPLICATION
Stir thoroughly with a flat paddle
Ready for use
Apply a minimum of 2 coats
Allow 2 hours @ 25ºC drying in between coats
Apply by brush, roller or airless spray
Thin with water if required

NEW MASONRY SURFACES
Ensure surfaces are clean, dry and contaminant free
Cracks should be raked out and primed with a suitable ChemSpec PROFESSIONAL Primer prior to filling
Prime the entire surface with a suitable ChemSpec PROFESSIONAL Primer

PREVIOUSLY PAINTED MASONRY SURFACES
Ensure surfaces are clean, dry and contaminant free
Remove all loose and flaking paint
Remove perished plaster and make good, prime with a suitable ChemSpec PROFESSIONAL Primer
Prime all chalky substrates with a suitable ChemSpec PROFESSIONAL Primer
Lightly sand well adhering coatings

OTHER SURFACES
Metal: Prime with ChemSpec INDUSTRIAL Galvanised Iron Primer or RP4
Wood: Prime with ChemSpec INDUSTRIAL Wood Primer followed by ChemSpec PROFESSIONAL Universal Undercoat
Gloss Enamels: Prime with ChemSpec PROFESSIONAL Universal Undercoat
Aluminium: Prime with ChemSpec INDUSTRIAL Vinyl Wash Primer

SPREAD RATE
8-10m2/lt depending on surface porosity

CAUTIONS
Do not apply in cold, wet weather
Drying times may vary with temperature

SAFETY
Keep out of reach of children

 
• Excellent obliteration
• Excellent barrier coat
• Provides a good key for subsequent topcoat adhesion

• Previously painted gloss enamels
• Wood primed with wood primer
• Plaster surfaces primed with plaster primer