APPLICATION
Stir thoroughly with a flat paddle
Ready for use
Apply a minimum of 3 coats
Allow 2 hours @ 25ºC drying in between coats
Apply by brush, roller or airless spray
Thin with water if required

SURFACE PREPARATION
Ensure surfaces are clean, dry and contaminant free
Metal: Prime with ChemSpec INDUSTRIAL Galvanised Iron Primer or RP4
Fibre Cement: Prime with 1 coat of Polaroof diluted 20% with water
Enamel: Prime with DeCO Universal Undercoat
Wood: Prime with ChemSpec INDUSTRIAL Wood Primer, followed by
DeCO Universal Undercoat
Aluminium: Prime with ChemSpec INDUSTRIAL Vinyl Wash Primer
New / previously painted masonry surfaces: Prime with
DeCO Masonry Primer

SPREAD RATE
1-2m2/lt system with membrane
4-6m2/lt as a standard roof coating

CAUTIONS
Do not apply in cold, wet weather
Drying times may vary with temperature

SAFETY
Keep out of reach of children